Cisco Meraki MS130-48P 48-Port PoE+ Cloud-Managed Access Switch
The Cisco Meraki MS130-48P is a Layer 2 enterprise access switch for locations that need 48 Gigabit Ethernet ports, centralized administration and a substantial shared power budget for connected devices. It provides 802.3at PoE+ up to 30W per port, subject to a 740W total switch budget, plus four 1Gbps SFP uplinks. Its cloud-managed operating model suits distributed offices and campus facilities that want consistent configuration and remote visibility.
Before purchasing, validate endpoint power needs, upstream bandwidth, rack ventilation, compatible optics and the required Meraki license. The MS130-48P does not provide 10Gbps SFP+ uplinks or multigigabit copper ports.
Procurement Facts at a Glance
MS130-48P-HW; 48 × 10/100/1000 RJ45 access ports; 4 × 1G SFP uplinks.
802.3at PoE+; 30W maximum per eligible port; 740W shared PoE budget.
Cisco Meraki Dashboard with an appropriate active license.
Price, stock, lead time, warranty entitlement and license duration confirmed in the formal quotation.
Operational Architecture and Business Value
Designed for the access layer, the MS130-48P aggregates desktop computers, printers, phones, wireless access points and other Ethernet endpoints. VLAN tagging helps separate traffic by department or device class. IEEE 802.1X authentication, DHCP snooping and access control capabilities support a defensible network access policy when configured with the surrounding identity and security infrastructure. Dashboard-based monitoring can reduce the need to travel to a remote site merely to inspect a port or review switch status.
The 740W budget is shared across all powered ports. For example, 30 devices reserving 20W each would require approximately 600W, leaving 140W for other loads; actual allocations must account for device negotiation and headroom. Forty-eight devices each requiring 30W would exceed the switch budget. The switch is best specified against an endpoint schedule rather than by port count alone.
Six procurement outcomes
- Predictable access connectivity: Gigabit copper ports support ordinary enterprise endpoints, while upstream contention should be assessed against four 1G SFP interfaces.
- Operational continuity: Monitor health remotely and plan resilient upstream connectivity; this unit is not a substitute for a redundant switch pair.
- Scalable administration: Apply repeatable configuration practices across multiple sites through Dashboard.
- Access security: Coordinate VLANs, 802.1X and DHCP protections with existing firewall and identity policies.
- Lower routine administration effort: Remote packet capture, logging integrations and managed firmware workflows support troubleshooting.
- Power planning clarity: Consolidated PoE+ simplifies endpoint cabling, but UPS and cooling must be sized for peak consumption.
Technical Specifications
| Specification | MS130-48P |
|---|---|
| Switch class | Cloud-managed Layer 2 access switch |
| Copper interfaces | 48 × 10/100/1000 Mbps RJ45 |
| Fiber uplinks | 4 × 1Gbps SFP, not 10G SFP+ |
| PoE standard | IEEE 802.3at, up to 30W per port |
| Shared PoE budget | 740W |
| Power input | 100–240V AC, 50–60Hz |
| Power load | 49W idle / 803W maximum, per Cisco datasheet |
| Operating temperature | 0–45°C |
| Management | Meraki Dashboard; license required |
| Stacking | No physical stacking |
Confirm current regulatory documentation, physical clearance and accessory requirements against the latest manufacturer documentation before final purchase approval.
Configuration and Sizing Worksheet
- Count active wired endpoints and reserve spare ports for planned expansion.
- Record each powered device’s negotiated PoE class and maximum draw, then sum all allocations against 740W with suitable spare capacity.
- Document whether the upstream network needs copper, 1G fiber or 10G connectivity; select another model if 10G uplinks are mandatory.
- Check 1U rack position, airflow, cable management, grounding, mains feed and UPS runtime against maximum expected load.
- Identify VLANs, DHCP dependencies, authentication servers, voice policies, logging destinations and management network reachability.
- Choose the correct Meraki license entitlement and duration; verify renewal ownership and operational support responsibilities.
- Specify supported transceivers, patch leads, rack accessories and commissioning services in the purchase request.
Deployment Scenarios in Uganda
Corporate offices and branch networks
Use the switch at the floor or branch access layer to connect workstations, phones and wireless access points. An upstream firewall or routed distribution layer should handle inter-VLAN routing and site security policy. For geographically distributed branches, common Dashboard configuration templates can make changes more consistent.
Banking and financial operations
Segment teller terminals, staff devices, guest connectivity and building systems with a documented VLAN and authentication design. Audit logging, change controls and tested recovery procedures remain essential; the switch itself does not replace a security gateway.
Schools and campuses
Power classrooms, staff telephony and compatible access points from a managed wiring closet. Evaluate aggregate wireless uplink demand carefully because the MS130-48P uplinks are 1G rather than 10G.
Government and regulated environments
Confirm procurement authorization, security architecture, cloud-management policy, product eligibility and data-governance requirements before deployment. Where isolated offline administration is required, assess whether a cloud-managed platform is appropriate.
Engineering Considerations
Packet forwarding and uplink design
Non-blocking access switching is valuable only when the surrounding topology is properly sized. Forty-eight Gigabit endpoints may collectively generate far more traffic than a single 1G uplink can carry. Determine expected concurrent throughput, VLAN paths and redundancy strategy. Link aggregation can help in supported designs, but does not make an individual flow faster than its member link and must match the connected device configuration.
Firmware, management and access control
The Meraki Dashboard provides centralized visibility and firmware management. Establish an approved maintenance window, document change ownership and confirm the switch can reach required cloud services. Use 802.1X and appropriate VLAN assignments to reduce unauthorized access. Integrate event reporting into existing monitoring processes where supported.
Continuity and recovery
Use suitable UPS protection and a documented replacement workflow. Because the MS130-48P has no physical stacking and should not be represented as having redundant hot-swappable power supplies, availability planning may require separate switches, diverse paths and spare hardware. Test uplink failover and recovery procedures before production cutover.
Pre-Purchase Buyer Checklist
License: Request a quote with hardware and the appropriate license line items separated so renewal obligations are visible. Power: Confirm endpoint consumption and the maximum 803W switch load when planning electrical infrastructure. Optics: Match supported 1G SFP modules and fiber types to the existing distribution switch. Expansion: If multigigabit wireless access points or 10G uplinks are in scope, compare the MS130-48X or another suitable family. Replacement: Record the serial number, entitlement details and support contact process. Delivery: Ask for a written lead time rather than assuming local stock. Warranty: Obtain the applicable Cisco terms and any local handling conditions in writing.
Uganda Procurement and Delivery
FourTeck can receive a bill of materials and help prepare a quotation for Kampala, Entebbe, Jinja, Mbarara, Gulu and other Ugandan destinations. Share the quantity, site location, required license term, desired transceivers and installation timeline. Stock position, shipment method, taxes, customs obligations and delivery date should be confirmed on the commercial offer. Pre-configuration and technical staging, where available, should be scoped before purchase.
Regional Supply Options
For cross-border programs, coordinate Uganda procurement with FourTeck Uganda, FourTeck Kenya, FourTeck Africa, FourTeck UAE and FourTeck Kuwait. Verify import responsibility, local warranty treatment and licensing territory with the supplier before issuing a multinational order.
Related Network Procurement Items
Ask about the MS130-24P when fewer powered ports are required, the MS130-48X for multigigabit access and 10G SFP+ uplinks, the non-PoE MS130-48 for data-only endpoints, compatible 1G SFP transceivers, fiber patch leads, rack accessories, UPS equipment and suitable Meraki licensing. Explore regional sourcing at FourTeck Uganda or submit a combined bill of materials through the contact team.
Technical Services
Useful project services include bill-of-materials validation, power-budget assessment, rack and cabling review, network segmentation planning, deployment staging and acceptance testing. Agree in advance whether configuration, firmware maintenance, site installation and post-sales troubleshooting are included or separately charged.
Frequently Asked Questions
Does the MS130-48P support 48 PoE devices simultaneously?
It offers 48 PoE-capable Gigabit ports, but the 740W shared budget governs the aggregate power allocation. Calculate each device’s requested or negotiated power and leave headroom; 48 devices demanding 30W each cannot all receive their maximum simultaneously.
Are the uplinks 10Gbps?
No. This model provides four 1Gbps SFP uplinks. For 10Gbps SFP+ and multigigabit access requirements, evaluate the MS130-48X and confirm its suitability for your network design.
Is a Meraki license necessary?
Yes. Include an appropriate Meraki license and duration in the procurement plan. Ask for clarity on entitlement activation, renewal costs, support scope and what happens when a license expires.
Can it connect to non-Cisco devices?
Standards-based Ethernet and VLAN connectivity can interoperate with equipment from other manufacturers, subject to compatible settings. Validate SFP support, spanning-tree behavior, authentication, PoE negotiation and link aggregation before deployment.
Does it perform core routing?
It is primarily a Layer 2 access switch. Design inter-VLAN routing, WAN connectivity and security enforcement around an appropriate router, firewall or Layer 3 distribution device.
Can it power wireless access points and cameras?
Yes, for compatible 802.3af/at endpoints within individual-port and aggregate power limits. Check the device’s negotiated requirements, especially for high-power access points that may require more than 30W.
What should be checked for a rack installation?
Confirm 1U mounting, cabinet depth, ventilation, ambient temperature, earthing, power outlets, UPS capacity and space for patch leads. Electrical sizing should consider the published maximum load rather than idle power alone.
Can the switch be physically stacked?
No physical stacking is supported. Multiple units can be administered within the Meraki environment, but this is not equivalent to a hardware stack with a shared control plane.
How are warranty and replacement handled?
Warranty and support rights depend on the applicable manufacturer entitlement and purchase channel. Ask the supplier to document serial-number handling, escalation, replacement shipping arrangements and any regional restrictions before ordering.
Can FourTeck assist with configuration?
Request a scoped service proposal covering Dashboard onboarding, VLANs, port profiles, authentication, uplink setup, firmware review and handover documentation. Service availability and charges should be agreed in writing.
Request a Cisco Meraki MS130-48P Quote
Share your delivery city, number of switches, expected PoE loads, license duration and uplink requirements. FourTeck can help establish an accurate hardware and accessory specification before quotation. Pricing, lead time, warranty terms and support services are confirmed during procurement.
