Cisco Meraki MS150-48T-4G Cloud-Managed Enterprise Access Switch

The Cisco Meraki MS150-48T-4G gives growing organizations a centrally administered 48-port Gigabit access switch with four 1G SFP uplinks. It is suited to enterprise edge connectivity where cloud visibility, straightforward provisioning and predictable port capacity matter. Its copper access interfaces do not supply Power over Ethernet. Buyers connecting wireless access points, surveillance cameras or telephones should either arrange separate power or evaluate an appropriate PoE variant.

Request Uganda Pricing and Availability

Procurement Snapshot

Architecture and Operational Role

The MS150-48T-4G is designed for the access layer, aggregating wired endpoint traffic before forwarding it over its Gigabit SFP interfaces or a suitably planned stack. The 104Gbps switching capacity published for this variant describes internal switching capability, not a promise that any single uplink will exceed its 1Gbps line rate. Network architects should distinguish aggregate switching capability from uplink oversubscription, especially when numerous workstations access centralized storage or application services simultaneously. The two dedicated stacking interfaces provide an 80Gbps stacking bandwidth specification, helping teams consolidate administration of compatible stack members. Confirm supported stacking topology, cable choices and software requirements during detailed design.

Business Benefits

1. Predictable wired access: Forty-eight Gigabit copper ports support dense desktop and office endpoint deployments.
2. Centralized administration: Meraki Dashboard enables consistent cloud-managed operational workflows across sites.
3. Expansion planning: Physical stacking supports a more coordinated approach to growing access capacity.
4. Segmentation: Plan VLANs and access policies according to organizational security requirements.
5. Operational visibility: Central management helps administrators investigate connectivity and configuration issues.
6. Procurement control: Non-PoE hardware avoids paying for an unused PoE power budget where all endpoints are independently powered.

Technical Specifications

Configuration and Sizing Worksheet

Begin by counting live endpoints, spare ports, uplink connections and future additions. Keep access port requirements separate from fiber uplink requirements. Where sustained traffic from dozens of endpoints may converge on a single 1Gbps uplink, model actual peak demand and consider a 10GbE-uplink alternative such as the MS150-48T-4X. Check rack depth, ventilation, UPS runtime, grounding and available power feeds before installation. Confirm the fiber type, link distance and supported SFP modules at both ends of each uplink. Identify the Dashboard organization and licensing model before choosing license SKUs. Request an itemized bill of materials showing hardware, subscriptions, optics, stack cables, freight and applicable taxes.

Deployment Scenarios

Enterprise Offices and Branch Networks

Use the switch to connect wired desktops, network printers and local appliances in a branch wiring closet. Document VLAN assignment and upstream routing boundaries so that the access layer remains simple to operate. Standardized switch profiles can help a distributed IT team manage several offices consistently.

Education and Campus Networks

Computer laboratories, administrative offices and libraries frequently require numerous wired endpoints but not necessarily PoE at every connection. This model offers a dense access-port layout, while the network designer should verify that 1Gbps uplinks are adequate for simultaneous classroom traffic.

Finance, Government and Regulated Environments

Segment departments and apply approved network access policies. Validate audit, identity, change-control and data-handling requirements independently; a managed switch alone does not establish regulatory compliance. Obtain approval for cloud management and licensing arrangements before purchase.

Hardware, Software and Resilience Considerations

Packet switching, access-port density and uplink bandwidth should be evaluated together. The 104Gbps capacity does not remove congestion at a 1Gbps fiber connection. Meraki Dashboard management provides a unified operational plane, but deployment teams must allow appropriate management connectivity and adopt secure administrator access. Physical stacking can simplify operation, yet it is not a substitute for redundant upstream paths, independent power planning and documented recovery procedures. Confirm supported failover and topology behavior against the current Cisco documentation before commissioning.

Licensing and Pre-Purchase Checklist

Meraki licensing is a separate purchasing consideration. For applicable classic licensing, the MS150 48-port family supports Enterprise and Advanced licensing, with available terms depending on the selected model and licensing framework. Subscription licensing uses corresponding MS100 Large tiers. Licensing rules differ between co-termination, per-device and subscription models; do not assume that tiers can be mixed freely. The correct selection depends on the existing organization, required features and intended term. Confirm whether the offer includes the license, whether the hardware is eligible for the intended Dashboard organization, and what support and replacement entitlements apply. Also verify whether the installation requires PoE, 10Gbps uplinks or a different model before committing.

Uganda Delivery and Procurement Support

FourTeck Uganda can prepare a project-specific quotation for customers in Kampala, Entebbe, Jinja, Mbarara, Gulu and other locations. Share the destination, quantity, licensing duration, SFP requirements and preferred installation schedule. Shipping times, inventory, duties, service availability and warranty arrangements are confirmed in the commercial offer rather than assumed on this page. For regional purchasing coordination, visit Uganda, Kenya, Africa, UAE or Kuwait.

Related Hardware and Accessories

For sites needing 10Gbps SFP+ uplinks, compare the MS150-48T-4X. For powered endpoints, investigate the MS150-48LP-4G or MS150-48FP-4G, with the precise PoE budget verified against Cisco’s model documentation. A complete deployment may also require approved SFP transceivers, fiber patch leads, stack cables, rack accessories and a UPS. Ask FourTeck to validate compatibility across the complete bill of materials.

Technical Procurement FAQ

Does the MS150-48T-4G provide PoE?

No. Its 48 copper ports provide data connectivity without supplying PoE power. Choose a suitable PoE model if endpoint power is required.

How fast are the uplinks?

The four SFP uplinks are 1Gbps interfaces. They are not 10Gbps SFP+ ports; compare the 4X variant when faster uplinks are necessary.

Is a license required?

Meraki licensing must be planned for the selected management and entitlement model. Request the appropriate license term and tier in the quotation.

Can the switch be stacked?

Yes. Cisco lists two stacking ports and 80Gbps stacking bandwidth for this model. Confirm the supported cabling and stacking topology.

Does it support routing?

Cisco specifies static routing. Evaluate more advanced routing needs separately instead of assuming full dynamic-routing capability.

Can it work alongside other vendors?

Standards-based Ethernet links can connect to compatible third-party equipment, subject to configuration, optical compatibility and interoperability testing.

How is warranty handled?

Coverage and replacement processes depend on the seller, eligibility, region and applicable Cisco terms. Request written confirmation with the quote.

What information is needed for a quotation?

Provide quantity, delivery city, license model and term, required optics, intended uplink speed and whether preconfiguration is needed.

Request Your Cisco Meraki MS150-48T-4G Quotation