Yealink MB-FS-P750T Floor Stand for MeetingBoard 75 Pro Mobile Collaboration Deployment
The Yealink MB-FS-P750T is the dedicated mobile floor stand with tray for the Yealink MeetingBoard 75 Pro. It is designed for organizations that need a large interactive collaboration display without committing the screen to one wall or one room. In practical terms, the stand turns the MeetingBoard 75 Pro into a movable room resource: a facilities or AV team can position the system in a boardroom, project room, training space, executive collaboration area or other suitable indoor location, then secure the installation in place for use. This is especially valuable where meeting spaces change function during the week, where wall construction cannot support a permanent mounting arrangement, or where leased premises restrict drilling and structural modification.
The stand is not a generic television trolley. Yealink identifies MB-FS-P750T specifically as an optional floor-stand accessory for MeetingBoard 75 Pro. Its physical geometry, tray dimensions and combined installed dimensions therefore matter during procurement. The stand itself measures 1371 mm wide, 850 mm deep and 994 mm high, with a net weight of 17.36 kg. Installed with MeetingBoard 75 Pro, the complete system reaches approximately 1705 mm wide, 850 mm deep and 1960 mm high and weighs about 69.6 kg. Those figures should be checked against doorway widths, lift capacity, corridor turning space, floor transitions and final operating clearances before delivery.
For procurement teams in Uganda, the main benefit is deployment flexibility without sacrificing a purpose-built fit. The integrated tray measures 1293 × 325 mm and carries up to 5 kg, providing a convenient surface for suitable lightweight room accessories. Swivel casters support controlled repositioning. The resulting installation can help standardize collaboration-room hardware while allowing the same 75-inch MeetingBoard platform to serve spaces that cannot justify permanent installation.
Procurement Fact Rail
MB-FS-P750T
MeetingBoard 75 Pro
3311084
17.36 kg net
Up to 5 kg
Passive accessory; no stand power draw
The procurement fact rail should be read as an installation checkpoint rather than a substitute for room planning. Because this accessory supports a large-format collaboration board, buyers should validate both the stand and the complete assembled system. The 850 mm depth determines the practical floor footprint, while the combined 1960 mm height can affect movement through doors, elevators and low-clearance areas if the unit is moved after assembly. For multi-floor offices, confirm lift dimensions and safe handling procedures. Quote status, lead time and applicable regional warranty terms should be confirmed on the FourTeck quotation because commercial conditions can vary by shipment and supply channel.
Operational Architecture and Product Overview
A floor stand appears mechanically simple, but in an enterprise collaboration deployment it becomes part of the physical architecture of the room. The MB-FS-P750T has three jobs: support the MeetingBoard 75 Pro at an appropriate presentation height, provide a stable footprint for normal indoor operation, and allow controlled mobility when the room layout changes. Yealink’s dedicated design avoids the uncertainty associated with selecting a third-party cart solely by screen size. Compatibility depends on more than diagonal display measurement; mounting geometry, load distribution, center of gravity, tray position and overall system dimensions all influence installation quality.
The most common procurement problem is deciding between wall mounting and a movable installation. Wall mounting can be appropriate for permanent boardrooms, but it requires a suitable wall structure, an approved mounting location, planned cable routes and acceptance that the display remains fixed. The MB-FS-P750T addresses environments where those conditions are undesirable. A project team may want to share a MeetingBoard between adjacent collaboration areas. A training department may need to change seating orientation. A leased office may prohibit invasive wall work. An executive suite may need the display moved away when not required. In each case, the stand changes the physical deployment model without changing the core MeetingBoard 75 Pro platform.
Mobility must still be managed. The combined MeetingBoard and stand weight is approximately 69.6 kg, so movement should be deliberate and performed according to site safety practices. The path should be clear, level and wide enough for the assembled footprint. Thresholds, ramps, carpet transitions and cable connections need attention. Swivel casters improve positioning but do not turn a large collaboration display into equipment intended for uncontrolled transport over rough surfaces. For frequent movement between buildings, floors or vehicles, buyers should discuss transport procedures and appropriate protection separately.
The integrated tray is another practical architectural element. At 1293 mm wide and 325 mm deep with a 5 kg load limit, it can provide organized placement for suitable lightweight accessories used around the collaboration system. Procurement teams should not assume that every peripheral belongs on the tray: weight, cable reach, ventilation and manufacturer placement guidance still apply. The tray is best treated as a managed accessory surface rather than general storage.
Because the stand itself is passive, it introduces no independent network interface, firmware, subscription or electrical load. The MeetingBoard 75 Pro and any attached peripherals retain their own power, network and platform requirements. This distinction helps budgeting: buying MB-FS-P750T does not add a software entitlement, but the overall collaboration solution may still require platform accounts, network services, optional cameras, microphones, controllers or Windows OPS modules according to the intended room design.
Enterprise Business Outcomes and Value Analysis
A movable MeetingBoard can serve changing room layouts instead of forcing every collaboration session around a fixed wall position. This can improve use of shared AV assets in flexible offices, training facilities and project spaces.
Using the dedicated stand reduces guesswork around physical compatibility. Procurement can specify the MeetingBoard 75 Pro and its matching MB-FS-P750T rather than qualifying an unrelated cart and mounting interface.
Organizations rolling out multiple medium meeting rooms can establish a repeatable physical standard. Fixed rooms may use approved wall mounting while flexible rooms use the dedicated floor stand, retaining a common collaboration endpoint.
A movable system can be positioned in controlled rooms when required. Physical security policies should define who may move the unit, where it may be stored and how cables and accessories are secured after relocation.
Swivel casters and the integrated tray support cleaner room changes. Facilities and AV teams gain a purpose-built platform rather than a collection of improvised furniture and accessory shelves.
The stand consumes no electricity and requires no software license. Its value is primarily in avoiding unnecessary wall work, improving reuse of the MeetingBoard and simplifying standardized procurement.
Office moves and room reassignments become less dependent on remounting the display. The stand can reduce building work when a collaboration area changes purpose, subject to safe relocation planning.
A matched stand creates a cleaner visual installation than ad-hoc furniture. This matters in client-facing meeting spaces, executive areas and training rooms where the physical environment contributes to professional presentation.
Key Hardware Highlights
The MB-FS-P750T is mechanical infrastructure rather than an active computing device, so its most important characteristics are dimensional fit, load handling and movement. Its 1371 × 850 mm base footprint creates the support area for the 75-inch MeetingBoard installation. The 994 mm stand height positions the mounting structure so that the complete system reaches approximately 1960 mm high. Net stand weight is 17.36 kg, while the complete MeetingBoard 75 Pro installation is approximately 69.6 kg. These numbers should feed directly into delivery and facilities planning.
The integrated tray is 1293 × 325 mm and rated for a maximum 5 kg load. Buyers should inventory any planned tray-mounted equipment before installation and avoid exceeding the limit. Swivel casters are central to the mobile design, supporting directional movement and room positioning. The clean fit with MeetingBoard Pro helps preserve a coherent appearance and reduces the need for third-party adaptation.
There are no processors, network ports, power supplies or firmware components in the stand itself. That is operationally useful: the accessory does not create another managed endpoint, does not require an IP address and does not introduce a recurring software charge. All active-system requirements remain associated with the MeetingBoard 75 Pro and optional collaboration peripherals. For lifecycle planning, organizations can therefore treat MB-FS-P750T as physical room infrastructure tied to the MeetingBoard 75 Pro form factor.
Technical Specifications Ledger
| Product | Yealink MB-FS-P750T Floor Stand with Tray |
| Part number | 3311084 |
| Confirmed compatibility | Yealink MeetingBoard 75 Pro |
| Stand dimensions | 1371 × 850 × 994 mm |
| Stand net weight | 17.36 kg |
| Packaging dimensions | 1170 × 935 × 175 mm |
| Gross packaged weight | 22.41 kg |
| Tray dimensions | 1293 × 325 mm |
| Tray load limit | 5 kg |
| With MeetingBoard 75 Pro | 1705 × 850 × 1960 mm; approximately 69.6 kg combined |
| Mobility | Swivel caster design |
| Electrical consumption | Not applicable to stand |
These specifications describe the stand and the known combined dimensions with MeetingBoard 75 Pro. They should not be confused with the MeetingBoard’s electrical and interface specifications. For room readiness, the most consequential values are the 850 mm depth, 1705 mm assembled width and 1960 mm assembled height. A doorway that accommodates the packaged stand may not accommodate a fully assembled MeetingBoard installation. Where access is constrained, installation sequencing should be planned so assembly occurs in the final room or in an area with a verified movement path.
Configuration and Sizing Worksheet
1. Workload and Scale Estimation
Count the rooms that genuinely need mobility. A fixed boardroom may be better served by an approved wall solution, while divisible training rooms, project areas and multipurpose spaces can benefit more from MB-FS-P750T. Record the number of MeetingBoard 75 Pro units, the number of stands and whether each system will remain paired permanently or be reassigned under an asset-management process.
2. Environment and Clearance
Measure the final operating area and the complete movement route. Allow for the assembled 1705 × 850 × 1960 mm envelope, people walking around the unit, furniture, doors, emergency routes and cable access. Confirm a smooth, stable indoor floor and identify any thresholds or ramps. Avoid planning based only on the display’s diagonal size.
3. Power and Cabling
The stand requires no power, but the MeetingBoard does. Identify an outlet that can be reached safely without creating trip hazards. If the board is connected by wired Ethernet or external AV peripherals, cable routing must accommodate the intended stand position. Mobility is reduced when multiple fixed cables tether the system, so document which connections must be disconnected before movement.
4. Platform and Licensing
MB-FS-P750T has no license. Licensing decisions belong to the MeetingBoard’s chosen collaboration environment and any optional computing module. Procurement should separate mechanical accessory cost from conferencing-platform subscriptions, room accounts and optional hardware so recurring and one-time costs remain clear.
5. Quote Checklist
Provide FourTeck with the exact MeetingBoard model, stand quantity, destination city, building access constraints, desired peripherals, deployment schedule and whether installation or pre-delivery validation is required. For existing MeetingBoards, provide the exact model designation rather than saying only “75-inch Yealink board,” because MB-FS-P750T compatibility is specifically documented for MeetingBoard 75 Pro.
Deployment Scenarios and Industry Use Cases
Large Enterprise and Multi-Site Offices
Enterprises often standardize meeting technology across headquarters, branches and project offices while facing different building conditions at each site. MB-FS-P750T supports a repeatable mobile installation for sites where wall mounting is impractical. A central IT or AV team can maintain a consistent MeetingBoard 75 Pro user experience while facilities teams retain flexibility over room layouts. For multi-site rollouts, document each room’s access dimensions, floor type and intended movement pattern before ordering. Standardization works best when the physical deployment is treated as part of the bill of materials rather than left to local improvisation.
Financial and Banking Institutions
Banks may use large collaboration displays for management meetings, training, project rooms and controlled internal presentations. A mobile stand can support rooms that change purpose, but physical movement should follow access-control and equipment-accountability policies. The stand itself has no data storage or network function; information-security controls remain associated with the MeetingBoard, connected network and conferencing platform. This separation is useful when security teams assess the solution: the stand is physical infrastructure, while the active endpoint remains subject to normal device hardening and account controls.
Education and Campus Networks
Universities, colleges and training centers may need interactive collaboration technology in seminar rooms, faculty meeting spaces and temporary learning environments. MB-FS-P750T allows a MeetingBoard 75 Pro to be positioned according to class layout rather than permanently fixed to one teaching wall. Campus deployments should pay particular attention to movement governance because high-traffic environments increase the chance of accidental impact or unauthorized relocation. Define storage, caster positioning, cable disconnection and staff responsibility procedures.
Government and Institutional Procurement
Government projects frequently require clear model identification, compatibility documentation and structured delivery acceptance. Specifying Yealink MB-FS-P750T for MeetingBoard 75 Pro creates a precise line item that can be validated against manufacturer documentation. Tender schedules should distinguish the stand from the MeetingBoard itself and state quantities separately. Delivery planning should account for packaged dimensions and final assembled dimensions, especially in older buildings with constrained corridors or elevators.
Technical Deep Dive: Mechanical Support and Movement Architecture
Unlike an active conferencing endpoint, MB-FS-P750T has no compute engine. Its engineering value is mechanical: geometry, load distribution, mounting alignment and mobility. The base depth and width establish the operating footprint, while the dedicated interface is designed around MeetingBoard 75 Pro. This matters because a 75-inch display has significant mass and a high center of gravity compared with ordinary office furniture. A purpose-built stand helps maintain the intended relationship between screen, support structure, tray and casters.
Swivel casters support directional adjustment, but operators should treat the complete 69.6 kg assembly as large AV equipment. Before moving it, disconnect or manage cables, clear the path, inspect transitions and ensure the destination has adequate floor space. Do not use the tray as a pushing handle or load it beyond 5 kg. The stand’s mobility is intended to support flexible indoor deployment, not rough transport or uncontrolled movement.
Technical Deep Dive: Software Ecosystem and Operational Control
The stand has no software, firmware or management plane. That absence is an advantage for operational simplicity. There is no separate credential, network address, update cycle or subscription associated with MB-FS-P750T. Management teams can focus software governance on the MeetingBoard 75 Pro and its collaboration services. When a system is moved between rooms, however, logical room configuration may need attention. Room accounts, network VLANs, display names, calendar resources and peripheral layouts can be tied to a physical room even when the hardware is movable. Organizations should decide whether the MeetingBoard is an asset assigned to one room or a shared device that can change locations.
This policy decision prevents confusion. If a board registered as “Boardroom A” is rolled into “Training Room B,” users may see incorrect calendar or room identity information. A controlled relocation procedure can include confirming network connectivity, room-resource identity, peripheral connections and user sign-in state after movement.
Technical Deep Dive: Availability, Resilience and Recovery
High availability for a floor stand means something different from high availability for a server. There is no failover electronics. Resilience comes from correct assembly, controlled use, suitable flooring and access to replacement mechanical parts or accessories if damage occurs. The mobile deployment can nevertheless contribute to business continuity: a MeetingBoard on a stand may be repositioned into another suitable room when the normal collaboration space is unavailable, provided network, power and room configuration permit.
For critical meeting environments, keep installation records and the product model in the asset register. If a caster, tray or structural component is damaged, stop moving or using the installation until it is assessed. Do not substitute unverified hardware merely to keep the room operational. Procurement resilience is improved by accurate model records, known supplier contacts and a clear warranty or replacement process.
Pre-Purchase Buyer Gap Checklist
Is a MeetingBoard included? No assumption should be made that the floor stand includes the MeetingBoard 75 Pro. It is an accessory line item and should be quoted distinctly. Does the stand need a license? No. It is passive mechanical equipment. Collaboration-platform licensing applies to the active room solution, not the stand. Can it be used with MeetingBoard 65 Pro or 86 Pro? Yealink documents separate MB-FS-P650T and MB-FS-P860T models for those sizes; MB-FS-P750T is the matching stand for MeetingBoard 75 Pro.
Will it fit through the building? The stand package is smaller than the complete assembled system. The stand packaging is 1170 × 935 × 175 mm, while the MeetingBoard 75 Pro on the stand is about 1705 × 850 × 1960 mm. Decide where assembly will occur and measure doors, lifts and turns accordingly. What is the real tray capacity? The documented limit is 5 kg. Do not treat the tray as a general-purpose shelf for heavy equipment. Does mobility eliminate cabling? No. The stand is mobile, but the MeetingBoard still requires power and may use wired network or peripheral connections. Cable management must be part of the room design.
Are there hidden recurring costs in the stand? There is no stand software subscription. Recurring costs can still exist elsewhere in the conferencing solution. Can it be moved every day? It is designed as a mobile floor stand, but movement frequency should be assessed against site conditions. Smooth indoor relocation between suitable spaces is different from transport over rough floors, stairs or outdoor routes. What should be checked at delivery? Verify model, packaging condition, quantity, included stand components against documentation, and any visible transit damage before installation.
What about warranty? Warranty terms should be confirmed on the supplied quotation for the destination and supply channel. Keep invoices, serial or part references where applicable and installation records. What about lifecycle compatibility? Because the stand is tied to MeetingBoard 75 Pro, future display replacement should include a fresh mounting-accessory compatibility check rather than assuming the stand will fit a different generation or size.
Uganda Procurement and Delivery Logistics
FourTeck Uganda can structure the MB-FS-P750T quotation around quantity, destination and the wider MeetingBoard deployment. For a clean procurement request, specify Yealink MB-FS-P750T, the number of stands, whether MeetingBoard 75 Pro units are already owned or also required, the destination city and any building-access limitations. This helps separate accessory supply from display supply and prevents mismatched stand selection.
Order processing should include model confirmation, commercial quotation, customer approval and delivery planning. Actual availability and delivery timing depend on stock position and supply route at the time of order, so buyers should request current lead time rather than relying on a generic estimate. Large projects should allow time for receiving inspection, assembly and room-readiness checks. Where pre-configuration is requested for the active MeetingBoard solution, provide platform and network requirements early; the stand itself requires mechanical assembly rather than software configuration.
For delivery, communicate loading-bay access, floor level, elevator dimensions and final room location. The stand package and the MeetingBoard package may arrive as separate items. If the complete unit is to be assembled on site, reserve adequate clear floor space and ensure trained personnel follow current installation documentation.
Local Coverage Matrix
Projects in Kampala may include corporate headquarters, hotels, training facilities, financial institutions and public-sector offices where flexible collaboration rooms are common. Entebbe deployments can include hospitality, aviation-linked offices and institutional facilities. Jinja customers may require collaboration systems for industrial, education and regional business sites. Mbarara projects can support universities, healthcare administration, branch offices and regional enterprises, while Gulu deployments can address institutional, education and distributed organizational requirements. For every city, the same planning principle applies: verify destination access and final room dimensions before dispatch, particularly when the MeetingBoard will be assembled before movement to its final position.
Cross-Border and Regional Supply Chains
Regional organizations often standardize collaboration equipment across several countries. FourTeck’s regional web presence can support procurement conversations for Uganda, Kenya, broader African markets, the UAE and Kuwait. Cross-border projects should use a consistent model list but obtain country-specific commercial terms, delivery arrangements and warranty confirmation. Do not assume that lead time, taxes or logistics are identical across markets.
For multi-country rollouts, create a master bill of materials that identifies MeetingBoard size and matching stand separately. Then create local delivery schedules by site. This reduces the risk that a 65-inch or 86-inch stand is accidentally ordered for a 75-inch Pro deployment. Regional staging can also standardize asset labels, room naming conventions and accessory packs before local installation.
Related Products and Planning Paths
The most important related product is the Yealink MeetingBoard 75 Pro because MB-FS-P750T is designed specifically for that platform. Buyers planning other screen sizes should evaluate the corresponding MB-FS-P650T for MeetingBoard 65 Pro or MB-FS-P860T for MeetingBoard 86 Pro rather than assuming cross-size compatibility. Projects requiring fixed installation can consider the appropriate Yealink wall-mount or wall-stand options documented for MeetingBoard Pro. Installations requiring powered height adjustment may evaluate Yealink’s compatible lift stand subject to current compatibility confirmation.
For the active room system, optional accessories can include suitable Yealink microphones, room controllers, camera modules and Windows OPS modules depending on the collaboration design. Browse the FourTeck Uganda technology portfolio or request a compatibility-checked bill of materials. The best accessory list is driven by room size, platform, participant count, acoustic conditions and desired interaction model rather than by adding every available option.
FourTeck Technical Service Capabilities
A successful MeetingBoard deployment begins before equipment reaches the room. FourTeck can assist with bill-of-materials validation so the floor stand, MeetingBoard size and planned peripherals are aligned. This is particularly important for MB-FS-P750T because its compatibility is specific to MeetingBoard 75 Pro. Model validation helps prevent a seemingly minor accessory mismatch from delaying an entire meeting-room installation.
For larger projects, staging can organize equipment by site or room, verify quantities and prepare active devices according to an agreed deployment plan. Where applicable and requested, firmware readiness for active Yealink equipment can be reviewed before shipment; the MB-FS-P750T itself contains no firmware. Pre-shipment checks can also include documentation of destination, room assignment and accessory pairing so installers receive a clearer package.
Post-sales support can help customers distinguish mechanical installation questions from MeetingBoard configuration issues. This matters because a symptom observed after moving a board—such as lost network connectivity—may relate to room cabling rather than the stand. A structured support process records the model, deployment context and observed issue before recommending the next action.
Extended Technical FAQ
Is MB-FS-P750T the correct floor stand for Yealink MeetingBoard 75 Pro?
Yes. Yealink identifies MB-FS-P750T as the optional floor stand with tray for MeetingBoard 75 Pro. This model-specific match is important because Yealink uses different stand models for the 65-inch and 86-inch Pro boards. When preparing a purchase order, include the full MeetingBoard model and the MB-FS-P750T identifier so procurement and receiving teams can validate the pairing. If you have an older MeetingBoard generation or a different 75-inch product, request a fresh compatibility check rather than relying on screen size alone.
What are the stand dimensions and installed dimensions?
The MB-FS-P750T stand measures 1371 × 850 × 994 mm. Its net weight is 17.36 kg. When installed with MeetingBoard 75 Pro, Yealink lists the combined dimensions at approximately 1705 × 850 × 1960 mm and combined weight at about 69.6 kg. Use the combined figures for room clearance and movement planning. The packaging dimensions for the stand are 1170 × 935 × 175 mm, so receiving and storage requirements differ from those of the assembled system. Always measure doorways, elevators and corridor turns before deciding where assembly should occur.
How much equipment can be placed on the integrated tray?
Yealink lists the tray dimensions as 1293 × 325 mm with a maximum load limit of 5 kg. That limit should be treated as a firm planning constraint. Before placing peripherals on the tray, add their individual weights and consider ventilation, cable reach and safe positioning. Do not use the tray for heavy storage or as a step, seat or moving handle. For peripherals that are not intended for tray placement, follow their own mounting guidance. A neat tray can improve room organization, but safe equipment placement takes priority over convenience.
Does the floor stand require electricity, network connectivity or licensing?
No. MB-FS-P750T is a passive mechanical accessory. It does not have a power supply, network interface, operating system, firmware subscription or room license. The MeetingBoard 75 Pro and any connected active accessories retain their own power, networking and software requirements. This distinction is useful for budgeting because the stand is a one-time physical infrastructure item, while conferencing services or room accounts may carry separate recurring charges. During quotation, ask for hardware and subscription items to be shown separately if your finance process distinguishes capital and operating costs.
Can the assembled MeetingBoard be moved between rooms?
Mobility is a core reason to choose this floor stand, and Yealink specifies swivel casters. However, the complete installation is large and weighs roughly 69.6 kg, so movement should be controlled. Disconnect or safely manage power, network and peripheral cables first. Clear the route and verify floor transitions, doorway widths and destination space. Avoid stairs, rough surfaces or uncontrolled slopes. Organizations that move the unit regularly should create a simple operating procedure identifying trained staff, approved routes and post-move checks. The system should be positioned securely before participants begin using the touchscreen.
Is MB-FS-P750T compatible with MeetingBoard 65 Pro or MeetingBoard 86 Pro?
No cross-size compatibility should be assumed. Yealink’s compatibility information assigns MB-FS-P650T to MeetingBoard 65 Pro, MB-FS-P750T to MeetingBoard 75 Pro and MB-FS-P860T to MeetingBoard 86 Pro. The models differ in dimensions and support geometry. If a project includes several MeetingBoard sizes, list each stand as a separate bill-of-materials line and label equipment by destination room. This reduces installation errors at sites where multiple packages arrive together. For any product generation not explicitly documented, obtain confirmation before ordering.
What should facilities teams verify before installation?
Facilities teams should verify the final floor area, movement route, power outlet location, network cabling plan and assembly space. The complete system is approximately 1705 mm wide, 850 mm deep and 1960 mm high. Keep emergency routes and doors unobstructed. Inspect the floor for stability and transitions that could complicate movement. Determine whether the unit will normally remain in one room or be moved. If it moves, decide how cables are disconnected and who is authorized to relocate it. Finally, ensure assembly follows current Yealink documentation rather than an improvised sequence.
How should warranty or damaged-hardware cases be handled?
Keep the commercial invoice, quotation, model information and delivery records. If damage is found on arrival, document the packaging and affected component before installation and contact the supplier promptly. For a later mechanical issue, stop using or moving the stand if structural integrity or safe support is in doubt. Warranty terms can depend on supply channel and destination, so the applicable coverage should be confirmed on the FourTeck quotation rather than inferred from unrelated regional listings. Do not drill, modify or substitute structural components without approved guidance, because unauthorized modification may affect safety and support eligibility.
Does using a mobile stand change MeetingBoard software configuration?
The stand itself does not change software configuration. The operational issue arises when the MeetingBoard is physically moved to another room. A conferencing endpoint may be associated with a room account, calendar resource, network segment, device name or peripheral set. If the board changes location, those logical settings may no longer match the room. IT teams should define whether the unit is permanently assigned to one room despite being movable within it, or whether it is a shared asset. For shared use, establish a post-move checklist covering network, room identity, audio/video peripherals and meeting-platform readiness.
What information should be included in a request for quotation?
State the product as Yealink MB-FS-P750T floor stand with tray for MeetingBoard 75 Pro and provide the required quantity. Add the delivery city in Uganda, whether MeetingBoard 75 Pro units are also required, the desired deployment date and any building-access constraints. If you need installation or active-device staging, mention the collaboration platform, room count and planned peripherals. For existing equipment, provide the exact MeetingBoard model. A detailed request allows the supplier to validate the bill of materials and provide clearer commercial terms, rather than treating the stand as a generic display cart.
Prepare a Compatibility-Checked MB-FS-P750T Procurement Request
For a dependable deployment, specify the stand and MeetingBoard as a matched system and include room-access information before ordering. FourTeck Uganda can prepare a quotation for the Yealink MB-FS-P750T, confirm its use with MeetingBoard 75 Pro, review quantities and discuss delivery or deployment requirements. Include your destination, required quantity, whether the MeetingBoard is new or existing, and any peripherals that must be incorporated into the room design. This gives procurement, IT and facilities teams a common reference before purchase approval.
For multi-site projects, provide a site schedule so equipment can be organized by location. For constrained buildings, include doorway or elevator concerns early. For existing MeetingBoards, provide the exact model designation. Clear information at quotation stage reduces avoidable accessory mismatches and supports a smoother handover from purchasing to installation.
Reviews
There are no reviews yet.