Yealink Meeting Room Installation Accessory • Uganda

Yealink MD-AVBracket-S MeetingDisplay AV Mounting Bracket

The Yealink MD-AVBracket-S is a purpose-built optional bracket for integrating selected Yealink collaboration devices with MeetingDisplay installations. It gives meeting-room designers and installers a defined mechanical mounting path for compatible MeetingBar, camera and speaker hardware rather than relying on improvised shelves or unrelated third-party fixtures. Yealink currently identifies the bracket for MeetingBar A25, MeetingBar A40, SmartVision 40 and MSpeaker Pro. This makes it particularly relevant when an organisation is standardising conference rooms around Yealink displays and wants repeatable positioning, cleaner equipment alignment and a more predictable installation bill of materials.

For procurement teams, a mounting bracket may appear to be a small line item, yet it can determine whether the selected display and AV device can be assembled as intended on installation day. FourTeck therefore recommends treating the MD-AVBracket-S as part of the room architecture rather than as an afterthought. Before ordering, identify the MeetingDisplay size, the attached Yealink device, whether the display will use a wall mount or mobile/floor stand, room quantities, cable-routing requirements and any other mounting hardware. This approach helps avoid delayed deployments caused by an omitted or incompatible accessory.

Request a Yealink MD-AVBracket-S Quote

Procurement Fact Rail

The bracket is a passive mechanical accessory and does not introduce a separate software subscription, network interface or electrical power requirement. The most important purchasing consideration is therefore physical and system compatibility. Yealink documentation shows MD-AVBracket-S as an optional bracket across MeetingDisplay 55, 65, 75 and 86 installations, while the device attached to it must also be one of the supported models. MeetingBar A50 uses the larger MD-AVBracket-L instead, and UVC86 or SmartVision 80 applications use the MD-PTZBracket. Confirming this distinction during quotation prevents a visually similar but mechanically incorrect accessory from entering the order.

Operational Architecture and Installation Role

Unlike an active conferencing endpoint, the MD-AVBracket-S has no processor, network stack or firmware. Its architecture is mechanical: it provides the mounting interface needed to position compatible Yealink AV equipment in a coordinated MeetingDisplay deployment. That simple function is operationally important. Conference-room projects combine large displays, video bars, cameras, speakers, compute devices, touch consoles, wall structures, mobile stands, power outlets and data cabling. Each element has its own fixing points and clearance requirements. A correctly selected bracket provides an engineered connection between parts of that ecosystem and makes the intended room design easier to reproduce across multiple sites.

The bracket measures approximately 165 mm wide, 84.5 mm deep and 149 mm high. Published bracket documentation gives mounting-hole spacing of 100 mm by 45 mm, a carton size of approximately 200 × 120 × 190 mm, net carton weight of 0.676 kg and gross carton weight of 0.812 kg. These dimensions are useful to integrators preparing packing lists, installation drawings or accessory storage. They also show why buyers should not substitute a generic mount merely because the attached device appears lightweight: mounting geometry, clearances and the supported display configuration matter as much as weight.

In a typical room, the MD-AVBracket-S forms one element of a larger mechanical chain. The MeetingDisplay itself may be installed using the optional MD-WallMount or a compatible floor/mobile stand. The AV bracket is then selected according to the conferencing endpoint or speaker being integrated. Yealink’s suggested MeetingDisplay bundles identify MD-AVBracket-S for MeetingDisplay 55 with MeetingBar A25, for MeetingDisplay 55/65/75 with MeetingBar A40, and for compatible MVC S40 arrangements. MSpeaker Pro can also use MD-AVBracket-S in supported MeetingDisplay arrangements. Because combinations vary, the complete topology should be checked as a system.

This system-level check addresses a common project problem: a buyer may correctly choose every electronic device but still omit a small mechanical component required to assemble the room. When dozens of rooms are being deployed, one missing bracket can multiply into repeated installer visits, rescheduling and additional freight. FourTeck can review the room list and accessory relationships before the purchase order is finalised, helping procurement teams convert the conceptual room design into a more complete bill of materials.

Enterprise Business Outcomes and Value Analysis

For large deployments, these outcomes should be viewed collectively. The MD-AVBracket-S does not improve camera resolution or network throughput; instead, it supports the physical integrity of the collaboration environment. That distinction matters when calculating project value. The cost of an installation accessory is often small relative to the display and conferencing endpoint, but the cost of discovering a missing or incorrect accessory after engineers reach a remote site can be substantial. Standardising accessory selection is therefore a practical risk-control measure for enterprise rollouts.

Key Hardware Highlights

Technical Specifications Ledger

The ledger intentionally separates bracket specifications from specifications of the attached MeetingDisplay or conferencing endpoint. Power consumption, environmental limits, camera performance, audio performance, operating system and collaboration-platform support belong to those active devices and should not be attributed to this passive bracket. Procurement documentation should preserve that distinction so technical evaluation remains accurate.

Configuration and Sizing Worksheet

Step 1 — Define the room standard

Record every room type in the project: executive room, boardroom, training room, huddle room or general meeting space. For each type, list the MeetingDisplay size and the conferencing endpoint. The MD-AVBracket-S should be selected only where the device combination is supported. If the design uses MeetingBar A50, the bracket requirement changes to MD-AVBracket-L; if it uses UVC86 or SmartVision 80, review MD-PTZBracket instead.

Step 2 — Confirm the display support method

State whether the MeetingDisplay is wall-mounted, installed on a fixed floor solution or deployed on a mobile stand. Yealink documents MD-WallMount and compatible stand options separately. The AV bracket does not replace the primary support hardware for the MeetingDisplay. Treat these as separate lines in the bill of materials.

Step 3 — Check clearances and cable routing

Provide installers with the bracket dimensions and review the final position of the attached AV device. Consider camera sightline, speaker projection, service access, cable bend radius and whether power/data outlets remain accessible. A neat mounting arrangement should not trap connectors or create a maintenance problem.

Step 4 — Power and cabling

The MD-AVBracket-S itself has no power feed. Nevertheless, the attached MeetingBar, camera, speaker or other room equipment may need power and data cabling. Build those requirements from the active device specifications. Where rooms use UPS-backed outlets, structured cabling or dedicated AV containment, include these requirements in the installation drawing rather than assuming the bracket supplies connectivity.

Step 5 — Licensing and subscriptions

There is no software licence for the bracket. Collaboration subscriptions, room accounts, device-management services or platform entitlements relate to the active conferencing solution and should be quoted separately where applicable. This prevents a mechanical accessory from being confused with the broader Microsoft Teams, Zoom or room-system licensing plan.

Quote preparation checklist

Send FourTeck the organisation name, delivery location, number of rooms, MeetingDisplay size per room, conferencing endpoint per room, wall or stand installation method, quantity of brackets, preferred deployment schedule and any requirement for installation support. For multi-site projects, provide a room schedule by location. This allows the accessory quantities to be reconciled against the primary equipment before commercial submission.

Deployment Scenarios and Industry Use Cases

Large Enterprise and Multi-Site Networks

Enterprises frequently define two or three standard meeting-room designs and replicate them across headquarters, branches and regional offices. In this environment, MD-AVBracket-S can become a standard accessory line for room types built around compatible MeetingDisplay and MeetingBar combinations. The practical benefit is repeatability. Facilities teams can use one installation drawing, procurement can order a known accessory bundle, and support teams can identify the mounting arrangement without inspecting every room from first principles. For branch rollouts, brackets can be packed by site with the corresponding display and conferencing equipment to reduce sorting errors.

Financial and Banking Institutions

Banks often operate secure headquarters, operations centres, training facilities and geographically distributed branches. Meeting rooms may need a controlled, professional layout with limited loose equipment. A designated mounting accessory supports that objective by giving compatible conferencing hardware a planned physical position. Procurement teams should still validate wall structure, display mounting, cable containment and room access rules with the installation contractor. The bracket is one component of the room, not a substitute for a complete site survey.

Educational and Campus Networks

Universities, training institutions and large schools may deploy collaboration displays in teaching rooms, administration spaces and hybrid-learning environments. Standardising the bracket and associated display arrangement can make rooms easier for campus IT teams to document and maintain. Mobile MeetingDisplay installations may also be considered where equipment needs to move between spaces, but the stand/display/device combination must be checked carefully before ordering.

Government and Public-Sector Procurement

Government projects commonly require clear model references, itemised bills of materials and controlled delivery schedules. The exact MD-AVBracket-S model can be stated as a separate accessory line, together with its compatible endpoint and MeetingDisplay. This improves tender clarity and helps receiving teams reconcile delivered accessories against the approved equipment schedule. Where installations span Kampala and up-country offices, packaging by destination can further reduce deployment friction.

Technical Deep Dive: Mechanical Interface and Device Positioning

The MD-AVBracket-S should be understood as a mechanical interface rather than a universal AV shelf. Its geometry is designed around a defined set of Yealink products. The 165 × 84.5 × 149 mm body and 100 × 45 mm hole spacing provide the physical basis for attachment, while the MeetingDisplay ecosystem supplies the broader mounting structure. This division of responsibility is important during design review: the display support must safely carry the display, while the AV bracket must be paired with a compatible device and installed in the intended position.

A standardised interface also improves documentation. Integrators can reference the actual accessory model in elevations, method statements and bills of materials rather than describing an unspecified camera or bar bracket. This becomes especially useful when the project moves from design to procurement and then to a separate installation team. Model-specific documentation reduces interpretation between stages.

Technical Deep Dive: Software Ecosystem and Operational Control

The bracket has no firmware, operating system, management portal or update process. That absence is itself useful to procurement planning because it means there is no independent cyber-security lifecycle, device credential, network address or patching requirement associated with the mount. All such considerations belong to the attached Yealink conferencing equipment. When organisations perform technology risk assessments, the MD-AVBracket-S can therefore be recorded as a passive mechanical component while the MeetingBar, camera, compute system and display are assessed according to their own software and connectivity capabilities.

This separation also clarifies support responsibilities. If a room experiences a conferencing application issue, network problem or firmware fault, the bracket is unlikely to be the cause. If the issue concerns physical alignment, looseness, damage or an incorrect accessory, then the mounting system becomes relevant. Maintaining accurate asset and installation records helps support teams distinguish these fault domains quickly.

Technical Deep Dive: Availability, Redundancy and Recovery

Mechanical accessories do not provide electronic high availability, yet they influence recovery time after physical service work. In a standardised estate, keeping a small quantity of validated mounting accessories with project spares can simplify room rebuilds, relocations or replacements. The decision should be based on the number of deployed rooms, lead times and the organisation’s tolerance for room downtime. For a single meeting room, a spare bracket may be unnecessary; for a large national rollout, holding controlled spares can be sensible.

Disaster-recovery planning for collaboration rooms should also record which bracket corresponds to each room template. If equipment is relocated after building work or a temporary office move, the team should not assume that every Yealink bar uses the same bracket. A25 and A40 can use MD-AVBracket-S in supported arrangements, while A50 requires MD-AVBracket-L. Recording that distinction prevents emergency relocation work from creating another compatibility problem.

Pre-Purchase Buyer Gap Checklist

Is this bracket universal? No. It is a model-specific Yealink accessory. Confirm both the MeetingDisplay arrangement and the attached AV device. Does it power the device? No. It is passive mounting hardware. Power and connectivity come from the supported conferencing equipment and room infrastructure. Does it replace the MeetingDisplay wall mount? No. The display’s primary wall or stand support is a separate component. Does it require a licence? No bracket licence is required. Any collaboration platform licensing belongs to the room system.

Will it fit MeetingBar A50? Yealink identifies MD-AVBracket-L for MeetingBar A50, not MD-AVBracket-S. What about UVC86? Yealink lists MD-PTZBracket for UVC86 in MeetingDisplay arrangements. Can it be used with SmartVision 40? Yes, SmartVision 40 is listed as compatible. Can it support MSpeaker Pro? Yes, Yealink lists MSpeaker Pro as compatible with MD-AVBracket-S. What dimensions should installers know? Approximately 165 × 84.5 × 149 mm, with 100 × 45 mm hole spacing.

Are there hidden recurring costs? Not for the bracket itself. However, the complete room may include licences, subscriptions, installation labour, display mounting hardware, stands, cabling and active AV equipment. Ask for an itemised room bill of materials rather than evaluating the bracket price in isolation. Should quantities equal the number of displays? Not automatically. Quantities should equal the number of supported room configurations that actually require MD-AVBracket-S. A project can contain different display and endpoint combinations, each needing different accessories.

What should be checked before shipment? Reconcile model names, quantities and destination rooms; verify the selected bracket against the endpoint; confirm the display support method; and ensure active-device power and cable requirements are documented. For projects with installation services, agree whether brackets will be pre-sorted by room or delivered centrally.

Uganda Procurement and Delivery Logistics

FourTeck supports Uganda organisations that need Yealink meeting-room equipment and accessories supplied as part of new installations, room refreshes or multi-site standardisation. For MD-AVBracket-S requests, the most useful starting point is the complete room configuration. A quote request that includes only the bracket quantity can be processed, but supplying the MeetingDisplay and attached device models gives the technical team an opportunity to flag obvious accessory mismatches before ordering.

Commercial processing typically begins with a written requirement, quantity and delivery destination. Project pricing, stock position and delivery timing should be confirmed on the formal quotation because these can vary with order size and supply conditions. For larger deployments, procurement teams can request a structured bill of materials that separates displays, conferencing endpoints, mounts, stands, brackets, controllers and other accessories. This makes internal approval and goods receiving easier.

Where technical staging is required, FourTeck can coordinate validation of the room equipment list before shipment. The bracket itself does not require configuration, but pairing it correctly with the intended hardware is part of deployment readiness. For projects outside Kampala, delivery planning should account for site access, installer schedules and whether all components for a room should arrive together. A complete room kit is usually easier to deploy than accessories arriving in separate, uncoordinated shipments.

Local Coverage Matrix

For each location, the procurement principle is the same: confirm the room configuration before accessories are dispatched. Multi-city projects benefit from a site-by-site equipment schedule showing which display, endpoint and bracket belongs at each destination. This prevents identical cartons from being redistributed incorrectly after arrival and gives installation teams a clear reference for room completion.

Cross-Border and Regional Supply Chains

Organisations operating across East Africa, the Gulf and wider African markets often prefer to standardise the same collaboration-room design across countries. FourTeck’s regional web presence supports procurement coordination through FourTeck Uganda, FourTeck Kenya, FourTeck Africa, FourTeck UAE and FourTeck Kuwait. Regional projects should still account for country-specific delivery, commercial and support arrangements.

For the MD-AVBracket-S, cross-border standardisation is straightforward when the same compatible Yealink room architecture is used. Maintain a master bill of materials with local quantities, then validate any country-specific changes in display size, stand type or conferencing endpoint before copying bracket quantities. This prevents a design change in one office from being hidden inside a global order template.

Related Yealink Products and Accessories

A complete room specification may include the Yealink MeetingDisplay range, MeetingBar A25, MeetingBar A40, SmartVision 40 and MSpeaker Pro. Buyers planning alternative configurations can also review MD-AVBracket-L, MD-PTZBracket and MD-WallMount.

These products are related by deployment role, but they are not interchangeable. The correct accessory depends on the endpoint and MeetingDisplay configuration. When building a quote, use exact model numbers rather than generic descriptions such as “camera bracket” or “display mount.” Exact references make technical approval, purchasing, warehouse receiving and installation substantially clearer.

FourTeck Technical Service Capabilities

FourTeck can support the procurement process with bill-of-materials verification, model compatibility review, project quantity reconciliation and deployment planning. For a mechanical accessory such as MD-AVBracket-S, the most valuable technical work happens before shipment: confirming that the selected bracket matches the endpoint, checking that the display mounting method is separately covered, and ensuring each room has the necessary components.

For broader room-system projects, staging can include verification of active equipment, firmware planning where applicable, accessory sorting and preparation of room-by-room packing information. The bracket itself has no firmware to update, but it should be included in the physical completeness check. Post-sales support can assist with identifying the correct replacement accessory, clarifying documented compatibility and coordinating next steps where the room configuration changes after purchase.

Organisations undertaking a phased rollout should preserve the approved room bill of materials as a controlled template. When a later phase begins, FourTeck can compare requested models against that baseline while accounting for any hardware-generation changes. This helps avoid silent substitutions and keeps facilities, IT and procurement teams aligned on the same room design.

Extended Technical FAQ

1. What is the Yealink MD-AVBracket-S used for?

The MD-AVBracket-S is an optional mechanical mounting accessory for supported Yealink MeetingDisplay installations. Its purpose is to provide a defined mounting arrangement for compatible AV devices rather than leaving installers to create an improvised support. Yealink lists MeetingBar A25, MeetingBar A40, SmartVision 40 and MSpeaker Pro as compatible devices. The bracket should be treated as one component in the complete display and conferencing installation. It does not replace the main MeetingDisplay wall mount or floor/mobile stand, and it does not provide power, network connectivity or software functionality.

2. Which MeetingDisplay sizes can use MD-AVBracket-S?

Yealink’s MeetingDisplay compatibility information lists MD-AVBracket-S as an optional accessory for MeetingDisplay 55, 65, 75 and 86. However, that does not mean every endpoint can be combined with every display using this bracket. The attached conferencing device must also be supported, and Yealink’s suggested bundles show specific combinations. For example, MeetingBar A40 is documented with MeetingDisplay 55/65/75 using MD-AVBracket-S. The safest purchasing method is to provide the complete display and endpoint models when requesting a quote so the combination can be checked as a whole.

3. Is MD-AVBracket-S compatible with MeetingBar A50?

No. Yealink’s mounting compatibility information identifies MD-AVBracket-L as the optional MeetingDisplay bracket for MeetingBar A50. The “S” and “L” versions should therefore not be treated as interchangeable sizes of the same universal part. If your room design uses A50, specify that model explicitly during quotation and request the corresponding mounting architecture. This is a good example of why accessory validation matters: the names are similar, and an incorrect bracket can easily be selected if a purchase request contains only a generic description such as “Yealink MeetingDisplay bracket.”

4. Can MD-AVBracket-S be used with SmartVision 40?

Yes. Yealink lists SmartVision 40 as compatible with MD-AVBracket-S. For an actual deployment, also verify the MeetingDisplay size and primary support method, then consider device positioning and cable routing. The bracket solves the mechanical attachment requirement, but the room design still needs to address the active device’s power, connectivity, camera field of view and service access. In multi-room projects, include SmartVision 40 and MD-AVBracket-S together in the approved room template so purchasing and installation teams can identify the intended relationship without relying on memory.

5. Does the bracket require power, firmware or a software licence?

No. MD-AVBracket-S is passive mounting hardware. It has no independent electrical interface, network interface, operating system, firmware or subscription. This means it adds no direct power consumption and no recurring software cost to the room. The active Yealink equipment attached to or used alongside the bracket can have its own power, network and platform requirements, so those specifications must be assessed separately. Procurement teams should separate the mechanical accessory cost from conferencing licences, room accounts, management services, cabling and installation labour when calculating the complete room budget.

6. What are the physical dimensions and weight?

Published bracket documentation gives dimensions of approximately 165 mm wide × 84.5 mm deep × 149 mm high. Hole spacing is listed as 100 mm × 45 mm. Carton dimensions are approximately 200 × 120 × 190 mm. Net carton weight is about 0.676 kg (1.49 lb), while gross carton weight is about 0.812 kg (1.79 lb). These figures are useful for installation drawings and logistics, but installers should use the current product documentation supplied for the project when preparing final fixing and assembly work.

7. Does MD-AVBracket-S replace MD-WallMount?

No. MD-WallMount is the primary wall-mount accessory for the MeetingDisplay, whereas MD-AVBracket-S is an AV-device mounting bracket used in compatible display arrangements. A wall-mounted room can therefore require both components: one supports the MeetingDisplay and the other supports the compatible AV device in relation to that display. Mobile or floor-stand installations have their own primary support hardware. Keeping these functions separate in the bill of materials prevents a common procurement mistake where an AV bracket is ordered but the display’s main mounting solution is omitted.

8. How should we specify this bracket in a multi-room tender?

Use the exact manufacturer and model reference “Yealink MD-AVBracket-S” and state the intended compatible endpoint for each room type. Ideally, the tender schedule should also list the MeetingDisplay size and primary mounting method. If a project includes different room designs, separate them rather than combining all brackets under one generic accessory line. For example, A25/A40 rooms may require MD-AVBracket-S while A50 rooms require MD-AVBracket-L. This room-by-room structure makes bid comparison more accurate and gives the receiving and installation teams a clearer basis for checking delivered quantities.

9. What warranty and replacement process applies?

Warranty terms for the supplied accessory should be confirmed on the FourTeck quotation and associated sales documentation because commercial coverage can depend on supply channel and project terms. If a bracket arrives damaged or a replacement is required, retain the model reference, purchase documentation and photographs of the issue, then contact the supplier promptly. For replacement planning, confirm that the room still uses the same endpoint and MeetingDisplay configuration. If the conferencing device has changed since the original installation, the correct replacement may be a different bracket model rather than another MD-AVBracket-S.

10. Can FourTeck help validate the full room configuration before purchase?

Yes. Provide the MeetingDisplay size, conferencing endpoint, room quantity, wall or stand installation method and deployment locations. For more complex projects, include a room schedule or bill of materials. The review can help identify whether MD-AVBracket-S is the appropriate accessory and whether related mounting components need to be included. This is particularly useful for multi-site deployments because small accessory errors can cause disproportionate delays when technicians and equipment are already at a remote location. Validation before ordering is generally simpler than correcting an incomplete mechanical design during installation.

Prepare Your Yealink MD-AVBracket-S Procurement Request

For a precise Uganda quotation, send FourTeck the required quantity together with the MeetingDisplay size and the Yealink device that will be mounted. If the order forms part of a new meeting-room project, include the wall or floor-stand arrangement and the number of rooms at each site. FourTeck can use this information to review the accessory relationship, structure the bill of materials and coordinate commercial and delivery requirements.

This is especially important where a project mixes MeetingBar A25, A40 and A50 rooms or includes different camera systems, because those configurations can require different bracket models. A clear room schedule helps ensure the MD-AVBracket-S is purchased only where it belongs and reduces avoidable installation delays.

Contact FourTeck Uganda for a Quote