Yealink MD-WallMount Wall Mount Bracket for MeetingDisplay

The Yealink MD-WallMount is a dedicated optional mounting accessory for organizations deploying Yealink MeetingDisplay 55, 65, 75 or 86 displays on a fixed wall. It is intended for professional meeting-room installations where display position, structural support, cable routing, viewing geometry and long-term service access need to be planned as part of the room design rather than treated as an afterthought. For procurement teams in Uganda, the principal value is straightforward compatibility: Yealink identifies MD-WallMount as an optional bracket for all four MeetingDisplay sizes.

A wall-mounted collaboration display can reduce floor-space consumption, establish a consistent room layout and create a cleaner presentation environment. However, mounting a large commercial display requires more than choosing a bracket. Installers must verify the wall substrate, load-bearing method, mounting height, VESA pattern, fastener specification, cable paths, nearby power and network outlets, and clearance for associated cameras, speakers or compute hardware. FourTeck can assist buyers in translating the room requirement into a validated bill of materials before purchase.

Request a Yealink MD-WallMount Quote

Compatibility and Installation Architecture

Yealink’s MeetingDisplay documentation identifies MD-WallMount as a separately purchased mounting accessory suitable for MeetingDisplay 55, 65, 75 and 86. The display-side VESA specification varies by screen size: the 55- and 65-inch MeetingDisplay models use a 400 × 400 mm VESA pattern, while the 75- and 86-inch versions use 600 × 400 mm. The corresponding display mounting screws are documented as M6 for MeetingDisplay 55 and M8 for the 65-, 75- and 86-inch models. These details are useful during site preparation, but installers should follow the current Yealink installation documentation and select wall anchors and structural fixings appropriate to the actual wall construction.

Yealink documents an installed depth of approximately 94 mm for MeetingDisplay 55, 65 and 75 when used with MD-WallMount, and approximately 97 mm for MeetingDisplay 86. This helps architects and integrators estimate the finished projection of the display from the wall. Because room layouts can include cable containment, recessed outlets, acoustic panels, decorative finishes and adjacent AV hardware, actual site clearance should be reviewed before drilling or final positioning.

Business Value for Meeting Rooms

Technical Specification Ledger

Configuration and Sizing Worksheet

Step 1 — Identify the display. Record whether the room uses MeetingDisplay 55, 65, 75 or 86. This determines the display dimensions, mass, VESA pattern and mounting screw specification that the installation team must accommodate.

Step 2 — Inspect the wall. Confirm whether the mounting surface is reinforced concrete, masonry, structural framing or another construction. Large displays impose meaningful static loads, so fixing selection should be performed by a qualified installer and matched to the substrate.

Step 3 — Define viewing geometry. Establish the display centerline, seating distance, camera position and eye-line. Avoid positioning solely around available sockets if that creates poor viewing or camera framing.

Step 4 — Plan services. Map AC power, Ethernet, HDMI and any USB or control cabling required by the MeetingDisplay and conferencing system. Decide whether outlets and cable containment will sit behind the display, below it or within a managed pathway.

Step 5 — Validate companion hardware. If the room includes MeetingBar A25, A40, A50, MVC hardware, UVC86, SmartVision or speaker accessories, identify the appropriate additional Yealink bracket. The MD-WallMount supports the display itself and should not be assumed to replace every accessory-specific mounting component.

Step 6 — Prepare the quote. Provide FourTeck with display size, quantity, room count, city, preferred installation approach and related Yealink endpoints. This allows the commercial and technical teams to review the requested bill of materials before order processing.

Deployment Scenarios

Corporate boardrooms: A fixed MeetingDisplay installation creates a permanent presentation focal point and can be coordinated with cameras, meeting bars and room compute devices. The bracket selection should be reviewed alongside camera height and sightlines so the final installation supports natural participant framing.

Financial institutions: Banks and financial organizations frequently standardize meeting-room equipment across headquarters and branches. A defined display mounting specification can simplify repeat deployments while site surveys account for differing wall construction and room dimensions.

Education: Universities, colleges and training facilities can use fixed displays in teaching, hybrid learning and administrative meeting spaces. Wall mounting may help protect circulation space and maintain a consistent front-of-room arrangement.

Government and institutional facilities: Procurement teams can document the display model, mounting accessory and related AV components as a repeatable room standard, subject to site-specific structural and security requirements.

Pre-Purchase Buyer Checklist

Before ordering, confirm that the requested accessory is MD-WallMount for the Yealink MeetingDisplay family rather than a similarly named MeetingBoard bracket. Confirm the exact display size and quantity. Review whether the project includes a camera, MeetingBar, MVC system or other device that requires an additional mounting bracket. Verify that the wall can safely support the selected display and that the installation team has suitable fixings for the substrate. Check the proposed cable route and power outlet placement before installation. Allow sufficient working clearance for technicians and avoid blocking ventilation or service access. If the room design includes acoustic wall panels, recessed joinery or decorative cladding, ensure the load transfers to an appropriate structural surface rather than relying on finish materials.

The MD-WallMount itself does not introduce software licensing, subscriptions, firmware or power consumption. Licensing considerations belong to the conferencing platform and endpoints deployed with the display. This distinction matters when preparing budgets: mounting hardware is a physical infrastructure line item, while collaboration services, room accounts and management subscriptions may be separate project costs.

Uganda Procurement and Delivery

FourTeck supports organizations sourcing Yealink collaboration equipment for projects in Uganda. Quote preparation can include the MD-WallMount alongside the corresponding MeetingDisplay and compatible room-system accessories. Buyers should provide project quantities and deployment locations early, particularly for multi-room or multi-site rollouts, so accessory requirements can be consolidated and shipment planning can be aligned with installation schedules.

For Kampala deployments, coordination can cover headquarters, offices, hotels, training facilities and institutional sites. Projects in Entebbe, Jinja, Mbarara and Gulu can likewise be prepared around the requested quantities and delivery requirements. For remote or distributed sites, packaging, staged dispatch and installer coordination should be agreed during quotation.

Regional Supply Coordination

Organizations operating across East Africa, the Gulf and broader African markets can coordinate related procurement through FourTeck regional channels. Visit FourTeck Uganda, FourTeck Kenya, FourTeck Africa, FourTeck UAE or FourTeck Kuwait when planning cross-border equipment requirements.

FourTeck Technical Service Capabilities

Mounting accessories are most effective when they are specified as part of the complete room architecture. FourTeck can review the bill of materials, confirm the relationship between the MeetingDisplay and room-system accessories, flag obvious compatibility gaps and coordinate product supply. For larger projects, staging and documentation can help installers understand which hardware belongs to each room. Where powered Yealink endpoints are included, firmware and configuration requirements can be reviewed separately from the passive mounting hardware.

Frequently Asked Questions

Which Yealink displays are compatible with MD-WallMount?

Yealink lists MD-WallMount as an optional accessory for MeetingDisplay 55, MeetingDisplay 65, MeetingDisplay 75 and MeetingDisplay 86. Because Yealink has several display and collaboration product families, confirm the exact endpoint model before ordering rather than assuming compatibility from screen size alone.

Does the MD-WallMount require power or network connectivity?

No. It is a passive mechanical mounting accessory. Power, Ethernet and AV connections are requirements of the display and conferencing equipment, not the bracket itself. The installation plan should nevertheless account for those cables because wall mounting affects where services should be located and how technicians will access them.

What VESA patterns are used by compatible MeetingDisplay models?

Yealink documents 400 × 400 mm VESA mounting for MeetingDisplay 55 and 65, and 600 × 400 mm for MeetingDisplay 75 and 86. The display mounting screw is documented as M6 on the 55-inch model and M8 on the 65-, 75- and 86-inch models.

How far does the display project from the wall?

Yealink’s MeetingDisplay datasheet lists an in-wall depth with MD-WallMount of 94 mm for the 55-, 65- and 75-inch displays and 97 mm for the 86-inch display. Site finishes, cabling and outlet placement can affect practical clearance, so room drawings should allow for the complete installation rather than relying on a single dimension.

Can the same bracket be standardized across different MeetingDisplay sizes?

The MD-WallMount model is listed as compatible with all four MeetingDisplay sizes, which is useful for procurement standardization. The displays themselves differ in dimensions, weight, VESA pattern and screw requirements, so each room still needs a size-specific installation check.

Do I need other brackets for a Yealink video system?

Possibly. Yealink documents additional brackets for compatible cameras, MeetingBars and related room hardware. Examples include MD-AVBracket-S, MD-AVBracket-L and MD-PTZBracket. The exact combination depends on the MeetingDisplay size and conferencing endpoint, so submit the full room equipment list when requesting a quote.

Is software licensing included with MD-WallMount?

No software licensing is associated with the passive wall bracket. Any platform licenses, room accounts or device-management subscriptions are tied to the collaboration solution being deployed. Procurement teams should separate physical mounting hardware from software and service costs in the project budget.

Can FourTeck help verify the mounting bill of materials?

Yes. Provide the MeetingDisplay size, room-system model, quantity and installation approach. A pre-order review can help identify the mounting accessories required for the intended topology and reduce avoidable mismatches between the display, camera, meeting bar and compute hardware.

Is professional installation recommended?

Yes, especially for larger displays. Wall construction and anchoring conditions vary significantly, and a large commercial display represents a substantial load. A competent installer should assess the substrate, select appropriate structural fixings, verify level and clearance, and follow current manufacturer instructions.

How do I request a Uganda quotation?

Send the required quantity, MeetingDisplay size, deployment city, room count and any related Yealink endpoints to FourTeck. Including these details at the quotation stage makes it easier to validate the accessory combination and prepare a more complete project bill of materials.